Basic Info.
Application
Parking, Hospital, Library, Company, Bank, Store
Specification
Long Ranger Reader
Product Description
UHF long range integrative reader
RFID UHF R2000 fixed 4 antenna reader
- Type:EC-304
- Chip:Impinj R2000
- Interface:RJ45,RS232 RS485 or others customize
- Functions: multi tag reading >700pcs/per second
- Product description: RFID UHF R2000 fixed 4 antenna reade
EC-304
RFID UHF R2000 Four Channel Fixed Reader
Product Description
EC-304 is a high performance 4-channel reader based on Impinj Indy R2000 chip which can be well adapted to the installation requirements for indoor or outdoor environments.
*Using Impinj INDY R2000 RF chip
*24hoursx365 days non-stop
*Peak Inventory Speed: 700 tags/s.
*GPIO control
*EPC C1 G2 and ISO 18000-6B protocols are both supported.
*Low power design, peak current is only 1.2A at 30dBm output power
*Antenna protection function, reminding the user when the antenna is not connected (can be turned off)
Key Features
Based on Indy R2000 chip: | High performance anti-collision algorithm |
RF transceiver is Impinj Indy R2000 | Unique multi tags identification algorithm. Provides the highest efficiency. |
Optimized algorithm for little tags | Dual CPU architecture |
Better tag response time. Optimized for little tag quantity applications. | The main CPU is responsible for the polling tag, and the sub CPU is responsible for data management. Polling tags and sending data in parallel do not occupy each other's time, greatly improving overall performance. The sub CPU is responsible for generating real random numbers. The sub CPU is responsible for monitoring the operating status of the system. |
Fast 4 antenna polling inventory | Two tag inventory modes |
High-speed polling of 4 antennas, the shortest polling time per antenna is 25ms. The polling time of each antenna can be configured separately. | Cache mode and real-time mode. Cache mode reads the tag and puts it into the cache and filters the duplicate data. The data is not redundant.this mode improve the efficiency of multi tag inventory Real-time mode uploads immediately after reading the tag, and the user can get the tag data in the first time. |
Hardware crash monitoring | Wide input low voltage design |
The hardware monitors the CPU operating status. 24 hours X360 days operation does not crash. | Only need DC 12-18v input voltage |
Low power design | RF amplifier status monitoring |
Maximum out power only needs 600mA +/-10% (12V DC Input). Low-power Mode, single tag only 300mA +/-10% (12V DC Input) | Monitor the operating status of the RF power amplifier. Ensure that the amplifier does not saturate and ensure that the amplifier will work stably for a long time. |
Realize all 18000-6B/C protocol functions | 18000-6B large data read/write |
100% 18000-6B compatible. Can be switched rapidly between two protocols. | Read 216 bytes in one time takes less than 500mS. Write 216 bytes in one time takes less than 3.5 seconds. Can also read/write data with various lengths. Extremely stable (approximate 100% success rate). |
Antenna connection status monitoring | Dual backup output power correction |
judge the antenna connection status. protect receiver can be closed by command. | Ensure that the RF output power is accurately and controllable. Two mutually-matched power check modules, the system can operate normally unless it is damaged at the same time |
Excellent onboard power system | Dual backup output power correction |
There are 8 independent power supplies onboard, and each component is powered by an independent power supply. All power supplies have a soft-start function to ensure voltage stability at all times | Ensure that the RF output power is accurately and controllable. Two mutually-matched power check modules, the system can operate normally unless it is damaged at the same time |
Simple and efficient command system | Outstanding thermal design |
Serial-based command system. Simple, efficient, convenient, and fast integration | The heat generating devices all have a heat conducting structure. Large area of heat sink contact surface. The thermally coupled interface uses a solid material with high thermal conductivity and does not volatilize at high temperatures. Disposable cast aluminum body heat dissipation, long-term continuous work does not heat |
Specification
Physical Characteristics |
Size | 210mm(L) x 200mm(W) x 30mm(H) |
Weight | Net Weight :1.8KG |
Material | Die-cast aluminum |
Input Voltage | DC 12V-18V |
Standby Mode Current | <30mA |
Sleep Mode Current | <100uA |
Max Operating Current | 600mA +/-5% @ DC 12V Input |
Working Environment |
Operating Temp | -20°C to 55°C |
Storage Temp | -20°C to 85°C |
Humidity | 5%~95%(non-condensing) |
Performance Parameter |
Protocol | ISO 18000-6C(EPC gen2) ISO 18000-6B |
Frequency Range | 902MHz~928MHz or 865MHz~868MHz or customize others frequency according to your needs |
Output Power | 0-33dbm |
Output Power Precision | +/- 1dB |
Output Power Flatness | +/- 0.2dB |
Data interface | RS232 and TCP/IP |
Receive Sensitivity | < -85 dBm |
Peak Inventory Speed | >700 tags/sec |
Tag Buffer Capacity | 1000 tags @ 96 bit EPC |
Tag RSSI | Supported |
Antenna Detector | Supported |
Ambient Temp Monitor | Supported |
Working Mode | Single/DRM |
GPIO | 2 inputs optical coupling 2 outputs optical coupling |
Max Baud Rate | 115200 bps |
Heat Dissipation | Air cooling |
Working Regions | US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Mainland China Japan Korea Malaysia Taiwan |
Interface Definition List
|
PIN ID | Function | Equivalent Circuit | Instructions |
PIN1 | GPIO 1 input + | | Voltage between PIN 1,2 (PIN 3,4) <=12V Heteropolarity LED equivalent resistance 470Ω Response time<= 150uS |
PIN2 | GPIO 1 input - |
PIN3 | GPIO 2 input + |
PIN4 | GPIO 2 input - |
PIN5 | GPIO 4 output | | Voltage between PIN 5,6 (PIN 7,8)<=12V Nonpolarity On resistance110Ω Response time <= 6mS |
PIN6 | GPIO 4 output |
PIN7 | GPIO 5 output |
PIN8 | GPIO 5 output |
Address:
Room 901-904, Fengtian Inovation & Tech Industrial Zone, Xuegang Road (N. ), Longhua, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Security & Protection
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Established in 1998, Shenzhen APEC Tech Co., Limited is a high-tech company which is involved in the whole process of Research, Development, Manufacture and Marketing on the following categories: Fingerprint access control, Fingerprint time attendance terminal, Facial and fingerprint time attendance with access control, RFID Access Controller and RFID Reader, Electronic lock & EM Lock, fingerprint door lock, Hotel Lock & Hotel Switch, ID/IC Card & Exit Button, Alarm Series and other related products
With high qualified engineers and technicians, APEC keeps improving his products to keep close to the latest technology of the world, with careful and responsible QCS, the quality of APEC products are well controlled, With Well Managed staffs, APEC products are precisely processed and packed, with professional Sales department, we have been exported our products to more than 60 countries all over the world, also our after sales service are highly praised by our customers.
It is our honor to provide high tech and needed products, offer cost effective products and best service. We are keep on trying, We believe, in the near future, we will become the largest security intelligent products provider in China and the pioneer of the global after-sales online service providers.